Welcome to Peloquins
JUNE 3 2008 UP DATE

We just started to ship out our back orders last Friday and Monday, we still have some that have not shipped yet due to more
gears at heat treat. We hope to have the remainder of the 5-speeds shipped out by the end of this week. The 6 - speeds will follow next week. The DSG's are almost done grinder has them and hope to have in our hands next week.

We just added a new feature to our planetary gears which will add better oiling to the Sun Gears. We made a new type of Hob
that will put a chamfer on the edge of gear teeth and this will allow oil to travel throughout all gear teeth.
Even though we have stopped making the factory type bolt kits our differentials will come with our new type of ring gear
bolts and necessary install kits for the 02A's and 02J's. I believe we are the only company that includes the necessary install
kits at no extra charge beyond our advertised pricing. We have seen many price increases throughout the past two years on
all the parts that we make but we are still going to maintain our current pricing throughout the year.

   To our valued customers past and future keep in mind that all our products are made in the USA.

   Below you will read that there has been for some time a change in Ring Gear size as well as rivet size.
unfortunately V.W. has not come up with a sure way of distinguishing which car has what. So we are forced to send out
only the early 02J differentials and if it turns out that the customer has the late type then we will exchange it at an additional
cost of $20.00 plus shipping. Best way to find out which one you have is to take the stock differential out first.
Remember we are on line with Etka so we get all the updates from V.W. so if we find out a better way to distinguish what you
have then we will post it.

   It seems as though that all Golf TDI transaxles and GTI 1.8 turbo Gas from 2004 up uses the late differential that we make
part number 02J 498 005B. Still give Vin number when ordering to help verify. Plus if you have had your Transaxle replaced
by V.W. under warranty you may now have the later type Ring Gear ( 113mm ) We just had to make an exchange due to this type
of issue. Plus it seems that V.W. has superseded new ring/pinions to the later type as well.
We also ran into another problem, if you have had an after market 3.39 ratio ring/pinion installed the bolt hole center and or
degrees of the bolt holes are not the same as the V.W. OEM Ring Gear. We tried to install one of these on a stock V.W. differential
and the bolt holes would not allow the bolts to go through. Due to the fact that we do not install the ring gear and or the complete
set of bolts we take NO responsibility for bolt failures and or subsequent damages. Please have the installer refer to the V.W. factory
Ring Gear installation procedures and check for any interference with the bolts or Ring Gear. If need be we will fax these
procedures to the installer!

We have found that the new 2005 B5 Jetta also uses the below changes to the ring gear and bolt size.
Our new part number for the Golf and Jetta B5 is 02J 498 005B
There is a moderate price change which is listed under 02J-B product.
Just click on the products and then 02J-B to view price.

March 28, 2006

  V.W. has superseded there ring gear in the 02J 5-speed type transaxle. As of Vehicle production date March 01 2004 the stock differential ring gear diameter has been reduced from 114mm to 113mm to allow for a larger rivet. Well now this means we have to make another differential to accept the change and make another bolt kit. So far V.W. has no such bolt kit and may not make one. The old bolt kit is 11.5mm diameter and the new would be 12.25mm. NOTE: The Vehicle production date is found on your door jam. Peloquins is in no way responsible for production date mistakes, the above production date is to the best of our knowledge correct. If more information should arise we will inform all.
It seems to date that the only car that this change affects is the Golf 4/cyl TDI engine. We at Peloquins are requesting that you include a VIN number to whom you are ordering from.

Gary Peloquin